Pages
Produits
Nouvelles
Machines de stock
Recherche
Machines de stock
Tout afficher
Centres d’usinage 5 axes
Centres d’Usinage Verticaux
Centres d’usinage 5 axes
Centres d’Usinage Verticaux
Tours Horizontaux
Centres d’Usinage Horizontaux
Tours Horizontaux
Tours Horizontaux
Tours Multifonctions
Centres d’Usinage Horizontaux
Tours Horizontaux
Tours Horizontaux
Tours Horizontaux
Tours Horizontaux
Centres d’usinage 5 axes
Centres d’usinage 5 axes
Tours Horizontaux
Tours Multifonctions
Tours Horizontaux
Tours Multifonctions
Centres d’usinage 5 axes
Centres d’Usinage Verticaux
MU-8000V-L
| Catégorie: | Centres d’usinage 5 axes |
| Projet: | 181512 |
| Année de production: | 2019 |
Description
- OKUMA 5-axis Vertical Machining Center MU-8000V-L with OSP-P300SA-H
- 166-tool Matrix ATC for BT40 (or Big Plus) or HSK-A63 spindle i/o 32-tool ATC
- Workpiece washing gun
- Spindle through coolant, high pressure 7.0MPa STD volume
- Shower coolant supply
- Simultaneous 5-axis KIT
- 5-Axis Auto Tuning System, High Spec Kit
- Collision avoidance system for basic 4/5 axis
- And more...
Showroom
MB-46VAE + STANDROID
| Catégorie: | Centres d’Usinage Verticaux |
| Projet: | 181477 |
| Année de production: | 2019 |
Description
- OKUMA Vertical Machining Center MB-46VAE with OSP-P300MA
- High speed spindle, 50 - 15,000 min-1 BT40, VAC22/18.5kW
- 48-tool ATC for BT40 (or Big Plus)
- Workpiece washing gun (coolant gun)
- Coolant pump 0,8 kw i/o 250W
- Oil skimmer
- Tool breakage detection incl. auto tool length offset (touch sensor)
- STANDROID
- Vertically articulated robot YASUKAWA;
MOTOMAN-GP25 with special I/F and pulse handle - Parallel hand for workpiece, Single type
- Workpiece stocker hand crd spec., stant type
- Auto side shutter (right side of machine)
- ROID-Navi
- Collision avoidance system Tentative
- Vertically articulated robot YASUKAWA;
- Pre.-arr. for hydraulic fixture
- API library 2 function (ON status)
- And more...
Showroom
MU-6300V-L
| Catégorie: | Centres d’usinage 5 axes |
| Projet: | 190162 |
| Année de production: | 2019 |
Description
- OKUMA 5-axis Vertical Machining Center MU-6300V with OSP-P300MA-H
- High speed spindle, 50 - 15,000 min-1 HSK-A63, VAC22/18.5kW (10min./cont.)
- 200-tool Matrix ATC for HSK-A63 spindle i/o 32-tool ATC
- Balluf Tool ID identification system *Yojitsu 8328
- Shower coolant supply without coolant pump
- Tool breakage detection incl. auto tool length offset Renishaw sensor TS27R
- 5-Axis Auto Tuning System, Standard Kit
- Robot Loader I/F Type-E Anybus-X AB7686 Device Net-Ether CAT
- And more...
Showroom
MB-56VA
| Catégorie: | Centres d’Usinage Verticaux |
| Projet: | 171084 |
| Année de production: | 2018 |
Description
- OKUMA Vertical Machining Center MB-56VA with OSP-P300MA
- High speed spindle, 50 - 15,000 min-1 BT40, VAC22/18.5kW (10 min./cont.)
- 32-tool ATC for BT40 (or Big Plus) spindle i/o standard 20-tool ATC
- Shower coolant supply from left side
- Lift up type chip conveyor, floor type hight:750mm (hinged conveyor)
- Pre-arr. for TSUDAKOMA RWA-250R.D (with manual tailstock TL-160M) CE
- Tool breakage detection including auto tool length offset (touch sensor)
- Auto zero offset function including work gauging, Renishaw touch probe
- One-touch IGF Advance -E kit instead of standard 3D-E kit
- Collision avoidance system for MU, Double column
- One-Touch Spreadsheet (excel machining)
- And more...
Showroom
LB2000 EX II C M 500
| Catégorie: | Tours Horizontaux |
| Projet: | 190363 |
| Année de production: | 2019 |
Description
- OKUMA CNC lathe model LB2000 EXII M with OSP-P300LA
- High Power Milling Motor (7.1kw) for new radial turret
- Pre-arr. for Mayfran chip conveyor (side chip disposal type) No.1
- Coolant flusher for saddle cover B (left side only)
- And more...
Showroom
MB-5000HII
| Catégorie: | Centres d’Usinage Horizontaux |
| Projet: | 180916 |
| Année de production: | 2019 |
Description
- OKUMA Horizontal Machining Center MB-5000H with OSP-P300MA
- Spindle 15,000min-1 BT40 Big Plus
- B-axis NC rotary table instead of standard 1 degree indexer
- Pre-arr. for Mayfran chip conveyor Type M-A (Rear disposal)
- Tool breakage detection incl. Auto tool length offset
- Pre-arr. for auto zero offset function (OMP60) incl. Software
- And more...
Stock
GENOS L2000-e
| Catégorie: | Tours Horizontaux |
| Projet: | 190043 |
| Année de production: | 2019 |
Description
- GENOS L2000-e (M x 380) with OSP P300LA-e
- Main spindle motor, VAC 15/11 kW (20min./cont)
- Enable SW movable type
- Foot pedal of lock switch type
- Loading system (1M1L) for CE GENOS L2000-e (Mx380)
- Auto power shut off
- Coolant level detection
- One touch IGF
- And more...
Stock
LB2000 EXII M C 300
| Catégorie: | Tours Horizontaux |
| Projet: | 190186 |
| Année de production: | 2019 |
Description
- OKUMA CNC Lathe Model LB2000 EXII M C with OSP P300LA 15 inch OSP suite
- Pre-arr. for Mayfran chip conveyor (
- High pressure coolant pump 0.8kW
- Coolant flusher for saddle cover B (left side only)
- And more...
Stock
MULTUS B250II C + ARMROID
| Catégorie: | Tours Multifonctions |
| Projet: | 181540 |
| Année de production: | 2019 |
Description
- OKUMA Intelligent Multitasking Model MULTUS B250II C 750 with OSP-P300SA
- Armroid (Type 2) Tentative
- Coolant wash 0.8 kw for robot arm
- Collision avoidance system
- Portable pulse handle
- ROID Navi
- Hand for workpiece
- Front door auto open/close with safety rubber SW
- End effector stocker (3ST)
- Pre-arr. for Mist collector
- API library 2 (ON status)
- And more...
Showroom
MA-600HII
| Catégorie: | Centres d’Usinage Horizontaux |
| Projet: | 180688 |
| Année de production: | 2018 |
Description
- OKUMA Horizontal Machining Center MA-600H II with OSP-P300MA
- High speed spindle, 12,000 min-1 BT50 Big Plus 37/26kw(10 min./cont.)
- 60-tool ATC for BT50 or BT50 Big Plus instead of standard 40-tool ATC
- Shower coolant
- Pre-arr. Mayfran chip conveyor Type M-A (Rear disposal) with chip pan
- Tool breakage detection including auto tool length offset
- Pre-arrangement for auto zero offset function (OMP60) including software
- DUTY
- And more...
Stock
LU4000
| Catégorie: | Tours Horizontaux |
| Projet: | 181446 |
| Année de production: | 2019 |
Description
- OKUMA CNC Lathe Model LU4000EX M 2SC 650 with OSP-P300LA
- Programmable tailstock, auto tow-along type base, dead center tailstock
- Pre-arr. for Mayfran chip conveyor No.1(E1)
- Ceiling shower coolant B (individual control)
- Upper / lower turret coolant discharge control, Individual control
- And more...
Stock
LB3000 EX II M C 1000
| Catégorie: | Tours Horizontaux |
| Projet: | 200248 |
| Année de production: | 2018 |
Description
- OKUMA CNC lathe model LB3000 EXII M C 1000 with OSP-P300LA
- Big bore spindle, dia 91, 4200min-1, 30/22kW (30min/cont.)
- Hollow cylinder Kitagawa SR1781 only for Big Bore, i/o Std.
- Built-in type tailstock MT No.4, with Tailstock center MT No.4
- Pre-arr. for Mayfran chip conveyor No.1 (E1) (Side disposal)
- High pressure coolant pump 0.8kW (for 500/1000)
- Coolant flusher for saddle cover B (left side only)
- In Process Auto Work Gauging System-D,inc 1pc.Each of feeler A and B
- Software for auto door o/c both sides
- Machining Navi L-G
- Software for coolant low level detection
- SERVO SENSOR UNIT
- Tool comp. function 96 sets
- DUTY
- SADDLE
- GIB
- WIPER SET
- And more...
Showroom
LB3000 EX II C MY 500 + AMROID
| Catégorie: | Tours Horizontaux |
| Projet: | 181508 |
| Année de production: | 2019 |
Description
- OKUMA CNC lathe model LB3000 EXII MY C 450 with OSP-P300LA 15inch OSP
- Big bore spindle, dia 91, 4200min-1, 30/22kW (30min/cont.)
- Hollow chuck B-210A8 hollow cylinder SR1670 and draw tube, for Big Bore
- Chip conveyor, side chip disposal H-type for 500 model, with CE-Mark
- ARMROID Type 1 (for only shaft workpiece) - tentative
- Coolant wash 0.75/0.55kw (60/50Hz) for robot arm
- Collision avoidance system
- Thermo Active dimension Stabilizer-Construction (TAS-C)
- Portable pulse handle
- ROID Navi
- End effector, Parallel hand for workpiece (1 pc.)
- End effector, mixing blower nozzle (1 pc.)
- End effector stocker (3ST)
- Pre-arrangement for work stocker
- And more...
- Work stocker 4-layers, simple chute
- OSP API
- Machining Navi L-g
- And more...
Stock
LT2000 EX 2T2MY
| Catégorie: | Tours Horizontaux |
| Projet: | 181136 |
| Année de production: | 2019 |
Description
- OKUMA CNC Lathe model LT2000 EX 2T2MY with OSP-P300LA
- Big bore, L-spindle, spindle size ø 80/120 bore, JIS A2-6
- Power-up L spindle motor VAC 22/15kW ( 5min./cont.)
- Power-up R spindle motor VAC 22/15kW ( 5min./cont.)
- 8" Hollow chuck KITAGAWA B-208-01
- Pre-arr. for Mayfran chip conveyor No.1 (E1) (side disposal)
- Shower coolant from ceiling side
- Shower coolant system B for L spindle
- Shower coolant system B for R spindle
- Touch setter M (available for both upper (A) and lower (B))
- DUTY
- And more...
Showroom
MCR-S 30x50E-A
| Catégorie: | Centres d’usinage 5 axes |
| Projet: | 190577 |
| Année de production: | 2019 |
Description
- MCR-S 30x50E-A with OSP-P300MA -H CNC Controller
- Special tool shank, crosswize ATC BT50/HSK-A63
- High column +400mm for 25/30 size model
- Oil skimer
- Through spindle coolant High/Low switchable (2MPa)
- Auto zero offset,auto gauging by Renishaw Touch Probe system RMP60
- Extention head S20000/L600/15*11kW
- and more...
Showroom
MU-6300V
| Catégorie: | Centres d’usinage 5 axes |
| Projet: | 181271 |
| Année de production: | 2019 |
Description
- OKUMA 5-axis Vertical Machining Center MU-6300V with OSP-P300M-H
- High speed spindle, 50 - 15,000 min-1 BT40, VAC22/18.5kW (10 min./cont.)
- 166-tool Matrix ATC for BT40 (or Big Plus) or HSK-A63 spindle i/o
32-tool ATC - Shower coolant supply
- Tool breakage detection incl. auto tool length offset
Renishaw sensor TS27R - Pre-arrangement for Auto zero offset function (Software is included)
- And More...
Stock
LB3000 EX II C M 500 + ARMROID
| Catégorie: | Tours Horizontaux |
| Projet: | 190183 |
| Année de production: | 2019 |
Description
- OKUMA CNC lathe model LB3000 EXII M C 500 with OSP-P300LA
- Big bore spindle, dia 91, 4200min-1, 30/22kW (30min/cont.)
- Pre-arr. for Mayfran chip conveyor No.1 (E1) (Side disposal)
- ARMROID
- One touch IGF Advanced-MD kit instead of std. One-touch IGF
Advanced-E kit - And more...
Showroom
Multus B400 II
| Catégorie: | Tours Multifonctions |
| Projet: | 181433 |
| Année de production: | 2019 |
Description
- OKUMA Intelligent Multitasking Model MULTUS B400II W 1500 with OSP-P300SA CNC Controller
- Milling spindle (H1) 10,000min-1, PREX Motor 20/14kW (i/o Std)
- Milling spindle (H1) Tool shank, CAPTO C6 (i/o Std HSK-A63)
- 120-tools ATC (instead of STD 20-tools ATC) with transport fixture for Magazine
- Front door auto open/close (x1500), with safety rubber switch for CE mark
- Pre-arr. for chip conveyor, No.2 (E2) Side disposal , new PIN layout
- And more...
Showroom
GENOS L3000-e (MYx400)
| Catégorie: | Tours Horizontaux |
| Projet: | 190044 |
| Année de production: | 2019 |
Description
- GENOS L3000-e (MY x 400) with OSP P300LA-e
- V12 Radial turret for M function i/o Std. turret (For M, MY )
- One touch IGF
- OKUMA Virus Protection System (OSP-VPS)
- API library 2 (On status)
- Helical cutting for MY-machine (X/Y surface, Y/Z surface on
MY machine) - Y axis turning function (Y-axis center height offset)
- Machining Navi L-g
- WTO Tooling Kit
- Ande more...
Showroom
Multus U4000 2SW 2000
| Catégorie: | Tours Multifonctions |
| Projet: | 181476 |
| Année de production: | 2019 |
Description
- OKUMA Intelligent Multitasking Model MULTUS U4000 2SW2000 with
OSP-P300SA-H CNC Controller - Main Big bore spindle, A2-11, 3,000min-1, PREX32/22kW incl. F2596
- Opposing spindle - tailstock function with work support confirmation
- 12" hollow chuck B-212A8 and draw tube
- 15" hollow chuck B-215A101 and draw tube
- NC-B axis contouring
- 80ATC
- Hinge chip conveyor H-type, Side chip disposal
- High precision C-axis for main and sub spindle
- Pre-arr for SMW steadyrest on lower
- Pre-arr. for Mist collector
- Simultaneous 5-axis KIT
- Gear machining package
- Revolving center MT No. 5
- Hydraulic oil temperature regulator
- And more...
Showroom
MU-8000V-L
| Catégorie: | Centres d’usinage 5 axes |
| Projet: | 181558 |
| Année de production: | 2019 |
Description
- OKUMA 5-axis Vertical Machining Center MU-8000V-L with OSP-P300SA-H
- Multi-tasking spindle, 50 - 10,000 min-1 + HSK-A100, VAC26/18.5kW (10min./cont.)
- M-Spindle torque up spec 10.000 min-1 (HSK-A100)
- 64-tool ATC (Chain type) for HSK-A100 spindle i/o 32-tool ATC
- Coolant temperature regulator
- Pre-arr. for Chip conveyor M-B type, Right side chip disposal
- Simultaneous 5-axis KIT
- 5-Axis Auto Tuning System, High Spec Kit
- And more...
Showroom
GENOS M560-V-e + STANDROID
| Catégorie: | Centres d’Usinage Verticaux |
| Projet: | 190702 |
| Année de production: | 2019 |
Description
- OKUMA vertical machining center M560-V-e with OSP-P300MA-e Controller
- Auto side shutter (Right side of machine)
- Chip conveyor, Side chip disposal (ATC MG side) incl. coolant tank
- Pre-arr. for auto clamping jig fixture
- Standroid for GENOS M560-V-e
- Vertically articulated robot YASUKAWA: MOTOMAN-GP25 with special I/F
- 2 jaw parallel gripper for workpiece, Single hand
- ROID-Navi
- Collision Avoidance System for STANDROID
- Max work load capacity: 10kg
- And more...
Showroom