Strony
Produkty
Aktualności
Maszyny na magazynie
Szukaj
In-Stock Machines
Pokaż wszystko
MB-46VAE + STANDROID
| Kategoria: | |
| Projekt: | 181477 |
| Rok produkcji: | 2019 |
Opis
- OKUMA Vertical Machining Center MB-46VAE with OSP-P300MA
- High speed spindle, 50 - 15,000 min-1 BT40, VAC22/18.5kW
- 48-tool ATC for BT40 (or Big Plus)
- Workpiece washing gun (coolant gun)
- Coolant pump 0,8 kw i/o 250W
- Oil skimmer
- Tool breakage detection incl. auto tool length offset (touch sensor)
- STANDROID
- Vertically articulated robot YASUKAWA;
MOTOMAN-GP25 with special I/F and pulse handle - Parallel hand for workpiece, Single type
- Workpiece stocker hand crd spec., stant type
- Auto side shutter (right side of machine)
- ROID-Navi
- Collision avoidance system Tentative
- Vertically articulated robot YASUKAWA;
- Pre.-arr. for hydraulic fixture
- API library 2 function (ON status)
- And more...
Maszyna demonstracyjna
MU-6300V
| Kategoria: | |
| Projekt: | 190162 |
| Rok produkcji: | 2019 |
Opis
- OKUMA 5-axis Vertical Machining Center MU-6300V with OSP-P300MA-H
- High speed spindle, 50 - 15,000 min-1 HSK-A63, VAC22/18.5kW (10min./cont.)
- 200-tool Matrix ATC for HSK-A63 spindle i/o 32-tool ATC
- Balluf Tool ID identification system *Yojitsu 8328
- Shower coolant supply without coolant pump
- Tool breakage detection incl. auto tool length offset Renishaw sensor TS27R
- 5-Axis Auto Tuning System, Standard Kit
- Robot Loader I/F Type-E Anybus-X AB7686 Device Net-Ether CAT
- And more...
Maszyna demonstracyjna
LB2000 EX II C M 500
| Kategoria: | |
| Projekt: | 190363 |
| Rok produkcji: | 2019 |
Opis
- OKUMA CNC lathe model LB2000 EXII M with OSP-P300LA
- High Power Milling Motor (7.1kw) for new radial turret
- Pre-arr. for Mayfran chip conveyor (side chip disposal type) No.1
- Coolant flusher for saddle cover B (left side only)
- And more...
Maszyna demonstracyjna
LU3000 EX M 2SC 1000
| Kategoria: | |
| Projekt: | 200530 |
| Rok produkcji: | 2021 |
Opis
- OKUMA CNC Lathe Model LU3000 EX M 2SC1000 with OSP-P300LA CNC Controller
- Big bore spindle
- Pre-arr. for Mayfran chip conveyor No.1 (E1) (side disposal)
- Upper/lower turret coolant dischargecontrol
- And more...
Maszyna demonstracyjna
MULTUS B250II C + ARMROID
| Kategoria: | |
| Projekt: | 181540 |
| Rok produkcji: | 2019 |
Opis
- OKUMA Intelligent Multitasking Model MULTUS B250II C 750 with OSP-P300SA
- Armroid (Type 2) Tentative
- Coolant wash 0.8 kw for robot arm
- Collision avoidance system
- Portable pulse handle
- ROID Navi
- Hand for workpiece
- Front door auto open/close with safety rubber SW
- End effector stocker (3ST)
- Pre-arr. for Mist collector
- API library 2 (ON status)
- And more...
Maszyna demonstracyjna
MA-600HIII
| Kategoria: | |
| Projekt: | 200410 |
| Rok produkcji: | 2021 |
Opis
- OKUMA Horizontal Machining Center MA-600H III with OSP-P300MA
- Hgh power spindle 50 - 10,000min-1 spindle BT50, VAC45/30kW (10min/cont)
- B-axis NC rotary table instead of standard 1 degree indexer
- Tool breakage detection including auto tool length offset
- Automatic rotation for set-up station by 90-degree
- 171-tool Matrix ATC for BT50 or BT50 Big Plus (Short flame type) i/o std. 60 ATC
- 3D-D kit i/o std 3D-E kit
- And more...
Maszyna demonstracyjna
LB3000 EX II C M 500 + ARMROID
| Kategoria: | |
| Projekt: | 190185 |
| Rok produkcji: | 2020 |
Opis
- OKUMA CNC lathe model LB3000 EXII M C 500 with OSP-P300LA
- Big bore spindle, dia 91, 4200min-1, 30/22kW (30min/cont.)
- Pre-arr. for Mayfran chip conveyor No.1 (E1) (Side disposal)
- ARMROID Typ
- One touch IGF Advanced-MD kit instead of std. One-touch IGF
Advanced-E kit - Work stocker 4-layers, simple chute
- And more...
Maszyna demonstracyjna
LB3000 EX II C MY 500 + AMROID
| Kategoria: | |
| Projekt: | 181508 |
| Rok produkcji: | 2019 |
Opis
- OKUMA CNC lathe model LB3000 EXII MY C 450 with OSP-P300LA 15inch OSP
- Big bore spindle, dia 91, 4200min-1, 30/22kW (30min/cont.)
- Hollow chuck B-210A8 hollow cylinder SR1670 and draw tube, for Big Bore
- Chip conveyor, side chip disposal H-type for 500 model, with CE-Mark
- ARMROID Type 1 (for only shaft workpiece) - tentative
- Coolant wash 0.75/0.55kw (60/50Hz) for robot arm
- Collision avoidance system
- Thermo Active dimension Stabilizer-Construction (TAS-C)
- Portable pulse handle
- ROID Navi
- End effector, Parallel hand for workpiece (1 pc.)
- End effector, mixing blower nozzle (1 pc.)
- End effector stocker (3ST)
- Pre-arrangement for work stocker
- And more...
- Work stocker 4-layers, simple chute
- OSP API
- Machining Navi L-g
- And more...
Magazyn
MCR-S 30x50E-A
| Kategoria: | |
| Projekt: | 190577 |
| Rok produkcji: | 2019 |
Opis
- MCR-S 30x50E-A with OSP-P300MA -H CNC Controller
- Special tool shank, crosswize ATC BT50/HSK-A63
- High column +400mm for 25/30 size model
- Oil skimer
- Through spindle coolant High/Low switchable (2MPa)
- Auto zero offset,auto gauging by Renishaw Touch Probe system RMP60
- Extention head S20000/L600/15*11kW
- and more...
Maszyna demonstracyjna
LB3000 EX II C M 500 + ARMROID
| Kategoria: | |
| Projekt: | 190183 |
| Rok produkcji: | 2019 |
Opis
- OKUMA CNC lathe model LB3000 EXII M C 500 with OSP-P300LA
- Big bore spindle, dia 91, 4200min-1, 30/22kW (30min/cont.)
- Pre-arr. for Mayfran chip conveyor No.1 (E1) (Side disposal)
- ARMROID
- One touch IGF Advanced-MD kit instead of std. One-touch IGF
Advanced-E kit - Work stocker 4-layers, simple chute
- And more...
Maszyna demonstracyjna
GENOS L3000-e (MYx400)
| Kategoria: | |
| Projekt: | 190513 |
| Rok produkcji: | 2019 |
Opis
- GENOS L3000-e (MY x 400) with OSP P300LA-e
- NC-V12 turret
- Chip conveyor, side disposal, H-type
- NC tailstock, Revolving Center MT No. 5
- Standard toolings for VDI turret
- Ande more...
Maszyna demonstracyjna
GENOS M560-V-e + STANDROID
| Kategoria: | |
| Projekt: | 190702 |
| Rok produkcji: | 2019 |
Opis
- OKUMA vertical machining center M560-V-e with OSP-P300MA-e Controller
- Auto side shutter (Right side of machine)
- Chip conveyor, Side chip disposal (ATC MG side) incl. coolant tank
- Pre-arr. for auto clamping jig fixture
- Standroid for GENOS M560-V-e
- Vertically articulated robot YASUKAWA: MOTOMAN-GP25 with special I/F
- 2 jaw parallel gripper for workpiece, Single hand
- ROID-Navi
- Collision Avoidance System for STANDROID
- Max work load capacity: 10kg
- And more...
Maszyna demonstracyjna
GENOS M460-5AX
| Kategoria: | |
| Projekt: | 190744 |
| Rok produkcji: | 2020 |
Opis
- OKUMA 5-axis Vertical Machining Center GENOS M460V-5AX with OSP-P300MA-H
- Pre-arrange for Lift-up chip conveyor floor type M-A type
- High speed spindle, 50 - 15,000 min-1 BT40, VAC22/18.5kW
- 48-tool ATC for BT40 spindle i/o standard 20-tool ATC
- 5-Axis Auto Tuning System [Standard Kit]
- Simultaneous 5-axis KIT
- And more...
Maszyna demonstracyjna
GENOS M560-V-e + STANDROID
| Kategoria: | |
| Projekt: | 191134 |
| Rok produkcji: | 2021 |
Opis
- OKUMA vertical machining center M560-V-e with OSP-P300MA-e Controller
- Auto side shutter (Right side of machine)
- Chip conveyor, Side chip disposal (ATC MG side) incl. coolant tank
- Pre-arr. for auto clamping jig fixture
- Standroid for GENOS M560-V-e
- Vertically articulated robot YASUKAWA: MOTOMAN-GP25 with special I/F
- 2 jaw parallel gripper for workpiece, Single hand
- ROID-Navi
- Collision Avoidance System for STANDROID
- Max work load capacity: 10kg
- And more...
Maszyna demonstracyjna
GENOS L3000-e (MYx400) + Standroid
| Kategoria: | |
| Projekt: | 210134 |
| Rok produkcji: | 2021 |
Opis
- GENOS L3000-e (MY x 400) with OSP P300LA-e
- Main spindle motor 22/15kw / RPM 38 - 3.800 min-1
- Chip conveyor, side disposal, H-type
- NC tailstock, Revolving Center MT No. 5
- Collision avoidance system
- STANDROID
- Robot hand 3jaws Single hand
- Work stocker,
- work table 6st lift-up.stackable type
- Safety Cover
- Ande more...
Maszyna demonstracyjna