Seiten
Produkte
Neuigkeiten
Lagermaschinen
Suche
Lagermaschinen
Alle anzeigen
Bearbeitungszentren Horizontal
5-Achsen Bearbeitungszentren
5-Achsen Bearbeitungszentren
Bearbeitungszentren Vertikal
Horizontale Drehmaschinen
5-Achsen Bearbeitungszentren
5-Achsen Bearbeitungszentren
5-Achsen Bearbeitungszentren
Dreh-/Fräszentren
Bearbeitungszentren Vertikal
Bearbeitungszentren Vertikal
5-Achsen Bearbeitungszentren
Horizontale Drehmaschinen
Horizontale Drehmaschinen
Bearbeitungszentren Horizontal
Horizontale Drehmaschinen
Horizontale Drehmaschinen
Dreh-/Fräszentren
Bearbeitungszentren Horizontal
5-Achsen Bearbeitungszentren
Horizontale Drehmaschinen
Horizontale Drehmaschinen
Horizontale Drehmaschinen
Horizontale Drehmaschinen
Horizontale Drehmaschinen
Horizontale Drehmaschinen
Horizontale Drehmaschinen
Horizontale Drehmaschinen
Horizontale Drehmaschinen
Horizontale Drehmaschinen
Horizontale Drehmaschinen
Horizontale Drehmaschinen
Horizontale Drehmaschinen
Horizontale Drehmaschinen
Horizontale Drehmaschinen
Horizontale Drehmaschinen
MA-600HII
| Kategorie: | Bearbeitungszentren Horizontal |
| Projekt: | 180437 |
| Produktionsjahr: | 2018 |
Beschreibung
- OKUMA Horizontal Machining Center MA-600H II with OSP-P300MA CNC Controller
- High speed spindle, 12,000 min-1 BT50 Big Plus 37/26kw(10 min./cont.)
- 60-tool ATC for BT50 or BT50 Big Plus
- B-axis NC rotary table
- Shower coolant
- Pre-arr. Mayfran chip conveyor Type M-A (Rear disposal) with chip pan
- Tool breakage detection including auto tool length offset
- Pre-arrangement for auto zero offset function (OMP60) including software
- And more...
Lagermaschine
MU-4000V-L
| Kategorie: | 5-Achsen Bearbeitungszentren |
| Projekt: | 160693 |
| Produktionsjahr: | 2016 |
Beschreibung
- OKUMA 5-axis Vertical Machining Center MU-4000V-L with OSP-P300SA-H
- Ball screw nut cooling X/Y/Z axis
- 166-tool Matrix ATC for HSK-A63 spindle i/o 32-tool ATC
- Pre-arr. for 2APC
- Shower coolant supply
- Tool breakage detection incl. auto tool length offset Renishaw sensor
- Pre-arrangement for Auto zero function (software is included)
- Simultaneous 5-axis KIT
- Collision avoidance system for basic 5 axis
- DUTY
- Smart I/F
- Modification from APC Table to standard Table
- DNC-C Ethernet P300MA
- Gear Machining package
- And more...
Vorführmaschine
MU-4000V-L
| Kategorie: | 5-Achsen Bearbeitungszentren |
| Projekt: | 161043 |
| Produktionsjahr: | 2017 |
Beschreibung
- OKUMA 5-axis Vertical Machining Center MU-4000V-L with OSP-P300SA-H
- Ball screw nut cooling X/Y/Z axis
- 166-tool Matrix ATC for BT40 (or Big Plus) or HSK-A63 spindle i/o 32-tool ATC
- Pre-arr. for 2APC including totally enclosing guard with shutter and 1 pc. of pallets Dia. 400mm M12 Tap
- Shower coolant supply
- Tool breakage detection incl. auto tool length offset Renishaw sensor
- Pre-arrangement for Auto zero function (software is included)
- Simultaneous 5-axis KIT
- DUTY
- Gear Machining package
- Smart I/F
- And more...
Vorführmaschine
MB-56VB
| Kategorie: | Bearbeitungszentren Vertikal |
| Projekt: | 160406 |
| Produktionsjahr: | 2016 |
Beschreibung
- OKUMA Vertical Machining Center MB-56VB with OSP-P300M
- 6,000min-1.11/7.5kW
- High speed spindle, 50 - 12,000 min-1 BT50 with BIG PLUS specification
- 48-tool ATC for BT40 (or Big Plus)
- Shower coolant supply from left side
- Tool breakage detection including auto tool length offset
- Pre-arrangement for auto zero offset function (software is included)
- High column specification (+200mm)
- Mounting touch sensor base for high cross +200mm
- Smart I/F
- And more...
Vorführmaschine
LU-S1600 2SC
| Kategorie: | Horizontale Drehmaschinen |
| Projekt: | 160143 |
| Produktionsjahr: | 2016 |
Beschreibung
- OKUMA CNC Lathe Model LU-S1600 L 2SC 480 with OSP-P300L
- Main spindle speed 6,000 min-1 (Dia. 140) 11/7.5kW (20min./cont.)
- Hydraulic quill type NC Self-traveling tailstock
- Tailstock sleeve advance speed switchable
- BCD 480mm spec.
- Chip conveyor(Hinge), Rear chip disposal H-type for 550 model and Machine linked chip conveyor specification
- Upper/lower turret coolant discharge control
- Coolant level detection
- Pre-arrangement for high pressure coolant unit 7MPa with pumping pomp,without coolant pressure high/low switchable
- OGL5-OII Loader (on-machine type) with legs for self-standing,
- Tailstock quill speed 2-steps switch
- Machining Navi L-g
- DUTY
- Smart I/F
- And more...
Vorführmaschine
MU-6300V
| Kategorie: | 5-Achsen Bearbeitungszentren |
| Projekt: | 190162 |
| Produktionsjahr: | 2019 |
Beschreibung
- OKUMA 5-axis Vertical Machining Center MU-6300V with OSP-P300M-H
- High speed spindle, 50 - 15,000 min-1 HSK-A63, VAC22/18.5kW
- 200-tool Matrix ATC for HSK-A63 spindle i/o 32-tool ATC
- Workpiece washing gun without coolant pump (Coolant gun)
- Pre-arrangement Spindle through coolant, high pressure 7.0MPA
- Shower coolant supply without coolant pump
- Lift up type chip conveyor Floor type height:1000mm (hinged conveyor)
- Pre-arr. for Hydraulic fixture
- Tool breakage detection incl. auto tool length offset Renishaw sensor
- 5-Axis Auto Tuning System, Standard Kit
- 1000 sets of common variables
- Programmable message function
- Mop-tool (adaptive control and overload detection)
- DNC-C Ethernet
- Collision avoidance system for basic 4/5 axis
- Robot Loader I/F Type-E Anybus-X AB7686 Device Net-Ether CAT
- API library 2 function
- And More...
Lagermaschine
MU-S600V
| Kategorie: | 5-Achsen Bearbeitungszentren |
| Projekt: | 161192 |
| Produktionsjahr: | 2017 |
Beschreibung
- OKUMA 5-axis Vertical Machining Center MU-S600V with OSP-P300MA-H
- Machine connection spec (left side (Master) incl. 2 pcs of leveling
- Absoscale X/Y/Z axis
- Shower coolant
- Drum filter Lift up type chip conveyor Consep 2000
- Pre-arr. for Hydraulic fixture
- Tool breakage detection incl. auto tool length offset
- Ball screw nut cooling X/Y/Z axis
- 5-axis Auto tuning system, Standard Kit
- One-touch IGF Advance -D kit
- DNC-C Ethernet
- External program selection C
- External M-Code command
- Robot Loader I/F Type-E up to terminal
- Collision avoidance system for basic 4/5 axis
- OSP-API
- D D encoder for B&C axis
- Pre-arrangement for mist collector
- Robot I/F Through Any Bus
- And more...
Vorführmaschine
MU-S600V
| Kategorie: | 5-Achsen Bearbeitungszentren |
| Projekt: | 161193 |
| Produktionsjahr: | 2017 |
Beschreibung
- OKUMA 5-axis Vertical Machining Center MU-S600V with OSP-P300MA-H
- Absoscale X/Y/Z axis
- Shower coolant
- Drum filter Lift up type chip conveyor Consep 2000
- Pre-arr. for Hydraulic fixture
- Tool breakage detection incl. auto tool length offset
- Ball screw nut cooling X/Y/Z axis
- 5-axis Auto tuning system, Standard Kit
- One-touch IGF Advance -D kit
- DNC-C Ethernet
- External program selection C
- External M-Code command
- Robot Loader I/F Type-E up to terminal
- Collision avoidance system for basic 4/5 axis
- Machining Navi M-g II
- And more...
Vorführmaschine
MULTUS B250II C 750
| Kategorie: | Dreh-/Fräszentren |
| Projekt: | 161199 |
| Produktionsjahr: | 2017 |
Beschreibung
- OKUMA Intelligent Multitasking Model MULTUS B250II C750 with OSP-P300SA CNC Controller
- 40-tool ATC
- Hollow chuck B-208 A6 and draw tube
- Drum filter chip conveyor (x 750) L, side disposal (hinge + scraper) line filter
- Pre-arr. for mist collector
- Power Monitor Wattmeter
- One-touch IGF Advance M-E kit
- Pitch error compensation C-axis
- Machining Navi T-g, for L spindle only
- Machining Navi M-i
- Smart I/F
- Measuring Sensor M&H RWP20.50-G-PP (2.4GHz)
- Pre-arr for In process gauging
- And more...
Vorführmaschine
MU-400VII
| Kategorie: | Bearbeitungszentren Vertikal |
| Projekt: | 200250 |
| Produktionsjahr: | 2018 |
Beschreibung
- OKUMA 5-axis Vertical Machining Center MU-400VII with OSP-P300MA-H
- High speed spindle, 50 - 15,000 min-1 BT40, VAC22/18.5kW (10 min./cont.)
- 200-tool Matrix ATC for BT40 (or Big Plus) spindle i/o 20-tool ATC
- Balluff Tool ID
- Software and electrical hardware only for spindle through, high pressure
7.0 MPA, with 7 steps switchable, without pumps - Pre-arrangement for Spindle through coolant, high pressure 7.0MPA
- Shower coolant supply without coolant pump
- Tool breakage detection including auto tool length offset (touch sensor)
- Auto zero offset function incl. work gauging, Renishaw touch probe OMP60
- Pre-arr. for hydraulic fixture
- Interactive gauging function
- Robot Loader I/F
- DNC-C Ethernet
- External Alarm Signals A, B, C
- And more...
Vorführmaschine
MB-56VA
| Kategorie: | Bearbeitungszentren Vertikal |
| Projekt: | 171084 |
| Produktionsjahr: | 2018 |
Beschreibung
- OKUMA Vertical Machining Center MB-56VA with OSP-P300MA
- High speed spindle, 50 - 15,000 min-1 BT40, VAC22/18.5kW (10 min./cont.)
- 32-tool ATC for BT40 (or Big Plus) spindle i/o standard 20-tool ATC
- Shower coolant supply from left side
- Lift up type chip conveyor, floor type hight:750mm (hinged conveyor)
- Pre-arr. for TSUDAKOMA RWA-250R.D (with manual tailstock TL-160M) CE
- Tool breakage detection including auto tool length offset (touch sensor)
- Auto zero offset function including work gauging, Renishaw touch probe
- One-touch IGF Advance -E kit instead of standard 3D-E kit
- Collision avoidance system for MU, Double column
- One-Touch Spreadsheet (excel machining)
- And more...
Vorführmaschine
MU-4000V-L
| Kategorie: | 5-Achsen Bearbeitungszentren |
| Projekt: | 160618 |
| Produktionsjahr: | 2016 |
Beschreibung
- OKUMA 5-axis Vertical Machining Center MU-4000V-L with OSP-P300SA-H
- Ball screw nut cooling X/Y/Z axis
- 166-tool Matrix ATC for HSK-A63 spindle i/o 32-tool ATC
- Pre-arr. for 2APC
- Shower coolant supply
- Tool breakage detection incl. auto tool length offset Renishaw sensor
- Pre-arrangement for Auto zero function (software is included)
- Simultaneous 5-axis KIT
- Gear Machining function only Software
- Smart I/F
- And more...
Vorführmaschine
LB2000 EX II M C 300
| Kategorie: | Horizontale Drehmaschinen |
| Projekt: | 180593 |
| Produktionsjahr: | 2018 |
Beschreibung
- OKUMA CNC lathe model LB2000 EXII M with OSP-P300LA
- Big bore spindle Main spindle dia 80, 5000min-1, 22/15kW
- Hollow cylinder SR1670 only (No draw tube) i/o Std, for Main Big Bore
- Pre-arr. for Mayfran chip conveyor No.1 (E1)
- Swing bucket type parts catcher for standard machine
- Universal Bar feeder interface only
- Tool life management
- And more...
Vorführmaschine
LB4000 EX II C 1500
| Kategorie: | Horizontale Drehmaschinen |
| Projekt: | 160433 |
| Produktionsjahr: | 2016 |
Beschreibung
- OKUMA CNC lathe model LB4000 EXII L C1500 with OSP-P300L
- Big bore spindle dia.110, 3000min-1, 37/30kW (30min/cont.)
- 15" hollow chuck Kitagawa B-215A101 and F2596H i/o standard chuck package
- Soft chuck jaw blank type B for B2-15-A chuck
- Hard chuck jaw std. type for B215 chuck
- Chip conveyor with CE mark, side chip disposal H type for T/C1500 model
- And more...
Lagermaschine
MB-5000HII
| Kategorie: | Bearbeitungszentren Horizontal |
| Projekt: | 180916 |
| Produktionsjahr: | 2019 |
Beschreibung
- OKUMA Horizontal Machining Center MB-5000H with OSP-P300MA
- Spindle 15,000min-1 BT40 Big Plus
- B-axis NC rotary table instead of standard 1 degree indexer
- Pre-arr. for Mayfran chip conveyor Type M-A (Rear disposal)
- Tool breakage detection incl. Auto tool length offset
- Pre-arr. for auto zero offset function (OMP60) incl. Software
- And more...
Lagermaschine
GENOS L300E-MY-e
| Kategorie: | Horizontale Drehmaschinen |
| Projekt: | 180502 |
| Produktionsjahr: | 2018 |
Beschreibung
- OKUMA CNC lathe model GENOS L300E-MY-e with OSP-P300LA-e
- Main spindle motor 15/11kw / RPM 3.000 std.
- NC-V12 turret / VDI turret for MY type
- Chip conveyor, side disposal, H-type
- Hard jaws, 3 pcs /set
- Soft jaws, 3 pcs /set type A
- N210 hollow chuck and hollow cylinder
- High pressure coolant pump 0,8kw
- OSP-P300L-R Animation Kit (TD-Kit)
- Touch setter, Manual
- USB port / 2 station
- Multi-Transformer 400V European Standard
- Position control of tailstock quill
- Standard toolings for VDI turret
- Simple tailstock tow-along
- Simple tailstock software
- And more...
Lagermaschine
LU3000 EX MY 2SC 950
| Kategorie: | Horizontale Drehmaschinen |
| Projekt: | 170888 |
| Produktionsjahr: | 2018 |
Beschreibung
- OKUMA CNC Lathe Model LU3000 EX MY 2SC950 with OSP-P300LA CNC Controller
- Programmable tailstock, auto tow-along type base, dead center tailstock MT No.5
- Built-in center type tailstock, MT No.4
- Pre-arr. for Mayfran chip conveyor No.1 (E1)
- Pre-arr. for hydraulic steady rest (SLU-X2Z) on lower turret
- Absoscale for Xa-axis only
- Turcite with 0.1 micron control for Xa-axis only
- And more...
Lagermaschine
MULTUS B300II W
| Kategorie: | Dreh-/Fräszentren |
| Projekt: | 180564 |
| Produktionsjahr: | 2018 |
Beschreibung
- OKUMA Intelligent Multitasking Model MULTUS B300II W with OSP-P300SA CNC
- Big bore spindle, A2-8/3,800min-1/22/15kW
- Milling spindle (H1) 10000 min-1, PREX Motor 16/11 kw (i/o STD)
- 60-tools ATC (i/o Std)
- Pre-arr. for chip conveyor Side disposal
- Coolant flush in slots beside H1 turret
- And more...
Lagermaschine
MA-600HII
| Kategorie: | Bearbeitungszentren Horizontal |
| Projekt: | 180688 |
| Produktionsjahr: | 2018 |
Beschreibung
- OKUMA Horizontal Machining Center MA-600H II with OSP-P300MA
- High speed spindle, 12,000 min-1 BT50 Big Plus 37/26kw(10 min./cont.)
- 60-tool ATC for BT50 or BT50 Big Plus instead of standard 40-tool ATC
- Shower coolant
- Pre-arr. Mayfran chip conveyor Type M-A (Rear disposal) with chip pan
- Tool breakage detection including auto tool length offset
- Pre-arrangement for auto zero offset function (OMP60) including software
- DUTY
- And more...
Lagermaschine
MU-6300V
| Kategorie: | 5-Achsen Bearbeitungszentren |
| Projekt: | 151155 |
| Produktionsjahr: | 2016 |
Beschreibung
- OKUMA 5-axis Vertical Machining Center MU-6300V with OSP-P300M-H
- High speed spindle 50 - 12,000min-1 BT50, VAC26/18.5kW (10min/cont) with BIG PLUS specification
- Absoscale X/Y/Z axis, in case with APC spec.
- 98-tool Matrix ATC for BT50 (or Big Plus) spindle
- Pre-arr. for 2 APC
- Shower coolant supply
- Tool breakage detection
- Pre-arrangement for Auto zero offset function (Software is included)
- 5-axis Tuning System Standard Kit
- DUTY
- And more...
Lagermaschine
LB3000 EX II C M 500
| Kategorie: | Horizontale Drehmaschinen |
| Projekt: | 180420 |
| Produktionsjahr: | 2018 |
Beschreibung
- OKUMA CNC lathe model LB3000 EXII M C 500 with OSP-P300LA
- Big bore spindle, dia 91, 4200min-1, 30/22kW (30min/cont.)
- Built-in type tailstock MT No.4, with Tailstock center MT No.4
- Pre-arr. for Mayfran chip conveyor No.1 (E1) (Side disposal)
- High pressure coolant pump 0.8kW (for 500/1000)
- Coolant flusher for saddle cover B (left side only)
- And more...
Lagermaschine
LB3000 EX II M C 1000
| Kategorie: | Horizontale Drehmaschinen |
| Projekt: | 171133 |
| Produktionsjahr: | 2018 |
Beschreibung
- OKUMA CNC lathe model LB3000 EXII M C 1000 with OSP-P300LA
- Big bore spindle, dia 91, 4200min-1, 30/22kW (30min/cont.)
- Built-in type tailstock MT No.4, with Tailstock center MT No.4
- Pre-arr. for Mayfran chip conveyor No.1 (E1) (Side disposal)
- High pressure coolant pump 0.8kW (for 500/1000)
- Coolant flusher for saddle cover B (left side only)
- DUTY
- Hollow Chuck B210 A8 with drawtube and jaws for LB3000 Big Bore
- Smart I/F
- And more...
Vorführmaschine
LB3000 EX II M C 500
| Kategorie: | Horizontale Drehmaschinen |
| Projekt: | 181113 |
| Produktionsjahr: | 2019 |
Beschreibung
- OKUMA CNC lathe model LB3000 EXII M C 500 with OSP-P300LA
- Big bore spindle, dia 91, 4200min-1, 30/22kW (30min/cont.)
- Built-in type tailstock MT No.4, with Tailstock center MT No.4
- Pre-arr. for Mayfran chip conveyor No.1 (E1) (Side disposal)
- High pressure coolant pump 0.8kW (for 500/1000)
- Coolant flusher for saddle cover B (left side only)
- And more...
Vorführmaschine
LU4000 EX MY 2SC 950
| Kategorie: | Horizontale Drehmaschinen |
| Projekt: | 170869 |
| Produktionsjahr: | 2018 |
Beschreibung
- OKUMA CNC Lathe Model LU4000EX MY 2SC 1250 with OSP-P300LA
- Big Bore Spindle (A2-11)30-3000min-1more horse-power PREX32/22kW(20min/cont.)
- Programmable tailstock, auto tow-along type base, dead center tailstock
- Pre-arr. for Mayfran chip conveyor No.1(E1) (side chip disposal type)
- And more...
Lagermaschine
LB2000 EX II M C 500
| Kategorie: | Horizontale Drehmaschinen |
| Projekt: | 180714 |
| Produktionsjahr: | 2018 |
Beschreibung
- OKUMA CNC lathe model LB2000 EXII M with OSP-P300LA
- Big bore spindle Main spindle dia 80, 5000min-1, 22/15kW
- Hollow cylinder SS1770 only (No draw tube) i/o Std, for Main Big Bore
- Pre-arr. for Mayfran chip conveyor No.1 (E1)
- And more...
Lagermaschine
LB3000 EX II MY C 450
| Kategorie: | Horizontale Drehmaschinen |
| Projekt: | 180422 |
| Produktionsjahr: | 2019 |
Beschreibung
- OKUMA CNC lathe model LB3000 EXII MY C 450 with OSP-P300LA
- Big bore spindle, dia 91, 4200min-1, 30/22kW (30min/cont.)
- Built-in type tailstock MT No.4, with Tailstock center MT No.4
- Pre-arr. for Mayfran chip conveyor No.1 (E1) (Side disposal)
- High pressure coolant pump 0.8kW (for 500/1000)
- Coolant flusher for saddle cover B (left side only)
- And more...
Vorführmaschine
LB3000 EX II L C 1000
| Kategorie: | Horizontale Drehmaschinen |
| Projekt: | 180594 |
| Produktionsjahr: | 2018 |
Beschreibung
- OKUMA CNC lathe model LB3000 EXII L C 1000 with OSP-P300LA
- Hollow cylinder SR1670 only (No draw tube) for Main i/o Std.
- Pre-arr. for Mayfran chip conveyor No.1 (E1) (Side disposal)
- And more...
Lagermaschine
LB3000 EX II M C 1000
| Kategorie: | Horizontale Drehmaschinen |
| Projekt: | 181000 |
| Produktionsjahr: | 2019 |
Beschreibung
- OKUMA CNC lathe model LB3000 EXII M C 1000 with OSP-P300LA
- Big bore spindle, dia 91, 4200min-1, 30/22kW (30min/cont.)
- Built-in type tailstock MT No.4, with Tailstock center MT No.4
- Pre-arr. for Mayfran chip conveyor No.1 (E1) (Side disposal)
- High pressure coolant pump 0.8kW (for 500/1000)
- Coolant flusher for saddle cover B (left side only)
- And more...
Lagermaschine
LB3000 EX II M C 1000
| Kategorie: | Horizontale Drehmaschinen |
| Projekt: | 200248 |
| Produktionsjahr: | 2018 |
Beschreibung
- OKUMA CNC lathe model LB3000 EXII M C 1000 with OSP-P300LA
- Big bore spindle, dia 91, 4200min-1, 30/22kW (30min/cont.)
- Hollow cylinder Kitagawa SR1781 only for Big Bore, i/o Std.
- Built-in type tailstock MT No.4, with Tailstock center MT No.4
- Pre-arr. for Mayfran chip conveyor No.1 (E1) (Side disposal)
- High pressure coolant pump 0.8kW (for 500/1000)
- Coolant flusher for saddle cover B (left side only)
- In Process Auto Work Gauging System-D,inc 1pc.Each of feeler A and B
- Software for auto door o/c both sides
- Machining Navi L-G
- Software for coolant low level detection
- SERVO SENSOR UNIT
- Tool comp. function 96 sets
- DUTY
- SADDLE
- GIB
- WIPER SET
- And more...
Vorführmaschine
LB3000 EX II M C 500
| Kategorie: | Horizontale Drehmaschinen |
| Projekt: | 181114 |
| Produktionsjahr: | 2019 |
Beschreibung
- OKUMA CNC lathe model LB3000 EXII M C 500 with OSP-P300LA
- Big bore spindle, dia 91, 4200min-1, 30/22kW (30min/cont.)
- Built-in type tailstock MT No.4, with Tailstock center MT No.4
- Pre-arr. for Mayfran chip conveyor No.1 (E1) (Side disposal) NEW pin
- High pressure coolant pump 0.8kW (for 500/1000)
- Coolant flusher for saddle cover B (left side only)
- And more...
Lagermaschine
LB3000 EX II M C 500
| Kategorie: | Horizontale Drehmaschinen |
| Projekt: | 181260 |
| Produktionsjahr: | 2019 |
Beschreibung
- OKUMA CNC lathe model LB3000 EXII M C 500 with OSP-P300LA
- Big bore spindle, dia 91, 4200min-1, 30/22kW (30min/cont.)
- Built-in type tailstock MT No.4, with Tailstock center MT No.4
- Pre-arr. for Mayfran chip conveyor No.1 (E1) (Side disposal) NEW pin
- High pressure coolant pump 0.8kW (for 500/1000)
- Coolant flusher for saddle cover B (left side only)
- And more...
Lagermaschine
LB3000 EX II M C 500
| Kategorie: | Horizontale Drehmaschinen |
| Projekt: | 181261 |
| Produktionsjahr: | 2019 |
Beschreibung
- OKUMA CNC lathe model LB3000 EXII M C 500 with OSP-P300LA
- Big bore spindle, dia 91, 4200min-1, 30/22kW (30min/cont.)
- Built-in type tailstock MT No.4, with Tailstock center MT No.4
- Pre-arr. for Mayfran chip conveyor No.1 (E1) (Side disposal) NEW pin
- High pressure coolant pump 0.8kW (for 500/1000)
- Coolant flusher for saddle cover B (left side only)
- And more...
Lagermaschine
LB3000 EX II M C 500
| Kategorie: | Horizontale Drehmaschinen |
| Projekt: | 181262 |
| Produktionsjahr: | 2019 |
Beschreibung
- OKUMA CNC lathe model LB3000 EXII M C 500 with OSP-P300LA
- Big bore spindle, dia 91, 4200min-1, 30/22kW (30min/cont.)
- Built-in type tailstock MT No.4, with Tailstock center MT No.4
- Pre-arr. for Mayfran chip conveyor No.1 (E1) (Side disposal) NEW pin
- High pressure coolant pump 0.8kW (for 500/1000)
- Coolant flusher for saddle cover B (left side only)
- And more...
Lagermaschine
LB3000 EX II M C 1000
| Kategorie: | Horizontale Drehmaschinen |
| Projekt: | 181263 |
| Produktionsjahr: | 2019 |
Beschreibung
- OKUMA CNC lathe model LB3000 EXII M C 1000 with OSP-P300LA
- Big bore spindle, dia 91, 4200min-1, 30/22kW (30min/cont.)
- Built-in type tailstock MT No.4, with Tailstock center MT No.4
- Pre-arr. for Mayfran chip conveyor No.1 (E1) (Side disposal)
- High pressure coolant pump 0.8kW (for 500/1000)
- Coolant flusher for saddle cover B (left side only)
- And more...
Lagermaschine
LB3000 EX II M C 1000
| Kategorie: | Horizontale Drehmaschinen |
| Projekt: | 181264 |
| Produktionsjahr: | 2019 |
Beschreibung
- OKUMA CNC lathe model LB3000 EXII M C 1000 with OSP-P300LA
- Big bore spindle, dia 91, 4200min-1, 30/22kW (30min/cont.)
- Built-in type tailstock MT No.4, with Tailstock center MT No.4
- Pre-arr. for Mayfran chip conveyor No.1 (E1) (Side disposal)
- High pressure coolant pump 0.8kW (for 500/1000)
- Coolant flusher for saddle cover B (left side only)
- And more...
Lagermaschine
LT2000 EX 2T2MY
| Kategorie: | Horizontale Drehmaschinen |
| Projekt: | 181136 |
| Produktionsjahr: | 2019 |
Beschreibung
- OKUMA CNC Lathe model LT2000 EX 2T2MY with OSP-P300LA
- Big bore, L-spindle, spindle size ø 80/120 bore, JIS A2-6
- Power-up L spindle motor VAC 22/15kW ( 5min./cont.)
- Power-up R spindle motor VAC 22/15kW ( 5min./cont.)
- 8" Hollow chuck KITAGAWA B-208-01
- Pre-arr. for Mayfran chip conveyor No.1 (E1) (side disposal)
- Shower coolant from ceiling side
- Shower coolant system B for L spindle
- Shower coolant system B for R spindle
- Touch setter M (available for both upper (A) and lower (B))
- DUTY
- And more...
Vorführmaschine