Lagermaschinen

Alle anzeigen

Horizontale bewerkingscentra

Verticale bewerkingscentra

5-assige machines

Horizontale draaibanken

Horizontale draaibanken

Multitasking machines

Horizontale bewerkingscentra

Horizontale draaibanken

Horizontale draaibanken

Horizontale draaibanken

5-assige machines

Horizontale draaibanken

Horizontale draaibanken

5-assige machines

Verticale bewerkingscentra

Horizontale draaibanken

Horizontale bewerkingscentra

Horizontale bewerkingscentra

Horizontale draaibanken

2SP-2500H

Kategorie: Horizontale bewerkingscentra
Projekt:210561
Produktionsjahr:2022
Beschreibung
  • OKUMA 2-spindle CNC Lathe 2SP-2500H with OSP-P300LA CNC Controller
  • 8kg spec. Loader G-Kit (1M/1L - 1 carrier)
  • Pre-arr. for Mayfran chip conveyor No. 2 (E2) (rear disposal)
  • Power up motor, 22/15kW for L and R spindle A2-6
  • Shower coolant type B ( L + R )
  • And more...

Lagermaschine

Jetzt anfragen

MB-46VAE + STANDROID

Kategorie: Verticale bewerkingscentra
Projekt:181477
Produktionsjahr:2019
Beschreibung
  • OKUMA Vertical Machining Center MB-46VAE with OSP-P300MA
  • High speed spindle, 50 - 15,000 min-1 BT40, VAC22/18.5kW
  • 48-tool ATC for BT40 (or Big Plus)
  • Workpiece washing gun (coolant gun)
  • Coolant pump 0,8 kw i/o 250W
  • Oil skimmer
  • Tool breakage detection incl. auto tool length offset (touch sensor)
  • STANDROID
    • Vertically articulated robot YASUKAWA;
      MOTOMAN-GP25 with special I/F and pulse handle
    • Parallel hand for workpiece, Single type
    • Workpiece stocker hand crd spec., stant type
    • Auto side shutter (right side of machine)
    • ROID-Navi
    • Collision avoidance system Tentative
  • Pre.-arr.  for hydraulic fixture
  • API library 2 function (ON status)
  • And more...

Vorführmaschine

Jetzt anfragen
VERKAUFT

MU-6300V

Kategorie: 5-assige machines
Projekt:190162
Produktionsjahr:2019
Beschreibung
  • OKUMA 5-axis Vertical Machining Center MU-6300V with OSP-P300MA-H
  • High speed spindle, 50 - 15,000 min-1 HSK-A63, VAC22/18.5kW (10min./cont.)
  • 200-tool Matrix ATC for HSK-A63 spindle i/o 32-tool ATC
  • Balluf Tool ID identification system *Yojitsu 8328
  • Shower coolant supply without coolant pump
  • Tool breakage detection incl. auto tool length offset Renishaw sensor TS27R
  • 5-Axis Auto Tuning System, Standard Kit
  • Robot Loader I/F Type-E Anybus-X AB7686 Device Net-Ether CAT
  • And more...

Vorführmaschine

Jetzt anfragen
VERKAUFT

LB2000 EX II C M 500

Kategorie: Horizontale draaibanken
Projekt:221078
Produktionsjahr:2023
Beschreibung
  • OKUMA CNC lathe model LB2000 EXII M with OSP-P300LA
  • Big Bore spindle Main spindle (A2-6) 5000min-1, 22/15kW (30min/cont.)
  • Pre-arr. for Mayfran chip conveyor (side chip disposal type) No.1
  • Coolant flusher for saddle cover B (left side only)
  • And more...

Lagermaschine

Jetzt anfragen

LU3000 EX M 2SC 1000

Kategorie: Horizontale draaibanken
Projekt:200530
Produktionsjahr:2021
Beschreibung
  • OKUMA CNC Lathe Model LU3000 EX M 2SC1000 with OSP-P300LA CNC Controller
  • Big bore spindle
  • Pre-arr. for Mayfran chip conveyor No.1 (E1) (side disposal)
  • Upper/lower turret coolant dischargecontrol
  • And more...

Vorführmaschine

Jetzt anfragen
VERKAUFT

MULTUS B250II C + ARMROID

Kategorie: Multitasking machines
Projekt:181540
Produktionsjahr:2019
Beschreibung
  • OKUMA Intelligent Multitasking Model MULTUS B250II C 750 with OSP-P300SA
  • Armroid (Type 2) Tentative
    • Coolant wash 0.8 kw for robot arm
    • Collision avoidance system
    • Portable pulse handle
    • ROID Navi
    • Hand for workpiece
    • Front door auto open/close with safety rubber SW
    • End effector stocker (3ST)
  • Pre-arr. for Mist collector
  • API library 2 (ON status)
  • And more...

Vorführmaschine

Jetzt anfragen
VERKAUFT

MA-600HIII

Kategorie: Horizontale bewerkingscentra
Projekt:200410
Produktionsjahr:2021
Beschreibung
  • OKUMA Horizontal Machining Center MA-600H III with OSP-P300MA
  • Hgh power spindle 50 - 10,000min-1 spindle BT50, VAC45/30kW (10min/cont)
  • B-axis NC rotary table instead of standard 1 degree indexer
  • Tool breakage detection including auto tool length offset
  • Automatic rotation for set-up station by 90-degree
  • 171-tool Matrix ATC for BT50 or BT50 Big Plus (Short flame type) i/o std. 60 ATC
  • 3D-D kit i/o std 3D-E kit
  • And more...

Vorführmaschine

Jetzt anfragen

LB3000 EX II C M 500 + ARMROID

Kategorie: Horizontale draaibanken
Projekt:190185
Produktionsjahr:2020
Beschreibung
  • OKUMA CNC lathe model LB3000 EXII M C 500 with OSP-P300LA
  • Big bore spindle, dia 91, 4200min-1, 30/22kW (30min/cont.)
  • Pre-arr. for Mayfran chip conveyor No.1 (E1) (Side disposal)
  • ARMROID Typ
  • One touch IGF Advanced-MD kit instead of std. One-touch IGF
    Advanced-E kit
  • Work stocker 4-layers, simple chute
  • And more...

Vorführmaschine

Jetzt anfragen

LB3000 EX II C MY 500 + AMROID

Kategorie: Horizontale draaibanken
Projekt:181508
Produktionsjahr:2019
Beschreibung
  • OKUMA CNC lathe model LB3000 EXII MY C 450 with OSP-P300LA 15inch OSP
  • Big bore spindle, dia 91, 4200min-1, 30/22kW (30min/cont.)
  • Hollow chuck B-210A8 hollow cylinder SR1670 and draw tube, for Big Bore
  • Chip conveyor, side chip disposal H-type for 500 model, with CE-Mark
  • ARMROID Type 1 (for only shaft workpiece) - tentative
    • Coolant wash 0.75/0.55kw (60/50Hz) for robot arm
    • Collision avoidance system
    • Thermo Active dimension Stabilizer-Construction (TAS-C)
    • Portable pulse handle
    • ROID Navi
    • End effector, Parallel hand for workpiece (1 pc.)
    • End effector, mixing blower nozzle (1 pc.)
    • End effector stocker (3ST)
    • Pre-arrangement for work stocker
    • And more...
  • Work stocker 4-layers, simple chute
  • OSP API
  • Machining Navi L-g
  • And more...

Lagermaschine

Jetzt anfragen

LT2000 EX 2T2MY

Kategorie: Horizontale draaibanken
Projekt:221341
Produktionsjahr:2023
Beschreibung
  • OKUMA CNC Lathe model LT2000 EX 2T2MY with OSP-P300LA
  • Big bore, L-spindle, spindle size ø 80/120 bore, JIS A2-6
  • Power-up L spindle motor VAC 22/15kW ( 5min./cont.)
  • Power-up R spindle motor VAC 22/15kW ( 5min./cont.)
  • Chip conveyor Hinge-type, Rear chip disposal H-type with CE-Mark and machine rise-up 150mm
  • Shower coolant system B for L spindle
  • Shower coolant system B for R spindle
  • Touch setter M (available for both upper (A) and lower (B))
  • And more...

Lagermaschine

Jetzt anfragen

MCR-S 30x50E-A

Kategorie: 5-assige machines
Projekt:190577
Produktionsjahr:2019
Beschreibung
  • MCR-S 30x50E-A with OSP-P300MA -H CNC Controller
  • Special tool shank, crosswize ATC BT50/HSK-A63
  • High column +400mm for 25/30 size model
  • Oil skimer
  • Through spindle coolant High/Low switchable (2MPa)
  • Auto zero offset,auto gauging by Renishaw Touch Probe system RMP60
  • Extention head S20000/L600/15*11kW
  • and more...

 

Vorführmaschine

Jetzt anfragen
VERKAUFT

LB3000 EX II C M 500 + ARMROID

Kategorie: Horizontale draaibanken
Projekt:190183
Produktionsjahr:2019
Beschreibung
  • OKUMA CNC lathe model LB3000 EXII M C 500 with OSP-P300LA
  • Big bore spindle, dia 91, 4200min-1, 30/22kW (30min/cont.)
  • Pre-arr. for Mayfran chip conveyor No.1 (E1) (Side disposal)
  • ARMROID
  • One touch IGF Advanced-MD kit instead of std. One-touch IGF
    Advanced-E kit
  • Work stocker 4-layers, simple chute
  • And more...

Vorführmaschine

Jetzt anfragen

GENOS L3000-e (MYx400)

Kategorie: Horizontale draaibanken
Projekt:190513
Produktionsjahr:2019
Beschreibung
  • GENOS L3000-e (MY x 400) with OSP P300LA-e
  • NC-V12 turret
  • Chip conveyor, side disposal, H-type
  • NC tailstock, Revolving Center MT No. 5
  • Standard toolings for VDI turret
  • Ande more...

Vorführmaschine

Jetzt anfragen
VERKAUFT

GENOS M460-5AX

Kategorie: 5-assige machines
Projekt:190744
Produktionsjahr:2020
Beschreibung
  • OKUMA 5-axis Vertical Machining Center GENOS M460V-5AX with OSP-P300MA-H
  • Pre-arrange for Lift-up chip conveyor floor type M-A type
  • High speed spindle, 50 - 15,000 min-1 BT40, VAC22/18.5kW
  • 48-tool ATC for BT40 spindle i/o standard 20-tool ATC
  • 5-Axis Auto Tuning System [Standard Kit]
  • Simultaneous 5-axis KIT
  • And more...

Vorführmaschine

Jetzt anfragen
VERKAUFT

GENOS M560-V-e + STANDROID

Kategorie: Verticale bewerkingscentra
Projekt:191134
Produktionsjahr:2021
Beschreibung
  • OKUMA vertical machining center M560-V-e with OSP-P300MA-e Controller
  • Auto side shutter (Right side of machine)
  • Chip conveyor, Side chip disposal (ATC MG side) incl. coolant tank
  • Pre-arr. for auto clamping jig fixture
  • Standroid for GENOS M560-V-e
    • Vertically articulated robot YASUKAWA: MOTOMAN-GP25 with special I/F
    • 2 jaw parallel gripper for workpiece, Single hand
    • ROID-Navi
    • Collision Avoidance System for STANDROID
    • Max work load capacity: 10kg
  • And more...

Vorführmaschine

Jetzt anfragen
VERKAUFT

GENOS L3000-e (MYx400) + Standroid

Kategorie: Horizontale draaibanken
Projekt:210134
Produktionsjahr:2021
Beschreibung
  • GENOS L3000-e (MY x 400) with OSP P300LA-e
  • Main spindle motor 22/15kw / RPM 38 - 3.800 min-1
  • Chip conveyor, side disposal, H-type
  • NC tailstock, Revolving Center MT No. 5
  • Collision avoidance system
  • STANDROID
    • Robot hand 3jaws Single hand
    • Work stocker,
    • work table 6st lift-up.stackable type
    • Safety Cover
  • Ande more...

Vorführmaschine

Jetzt anfragen
VERKAUFT

2SP-2500H

Kategorie: Horizontale bewerkingscentra
Projekt:220531
Produktionsjahr:2023
Beschreibung
  • OKUMA 2-spindle CNC Lathe 2SP-2500H with OSP-P300LA CNC Controller
  • 8kg spec. Loader G-Kit (1M/1L - 1 carrier)
  • Pre-arr. for Mayfran chip conveyor No. 2 (E2) (rear disposal)
  • Power up motor, 22/15kW for L and R spindle A2-6
  • Shower coolant type B ( L + R )
  • And more...

Lagermaschine

Jetzt anfragen

2SP-2500H

Kategorie: Horizontale bewerkingscentra
Projekt:221351
Produktionsjahr:2023
Beschreibung
  • OKUMA 2-spindle CNC Lathe 2SP-2500H with OSP-P300LA CNC Controller
  • 8kg spec. Loader G-Kit (1M/1L - 1 carrier)
  • Pre-arr. for Mayfran chip conveyor No. 2 (E2) (rear disposal)
  • Power up motor, 22/15kW for L and R spindle A2-6
  • Shower coolant type B ( L + R )
  • And more...

Lagermaschine

Jetzt anfragen

LB2000 EX II L W 500

Kategorie: Horizontale draaibanken
Projekt:220494
Produktionsjahr:2022
Beschreibung
  • OKUMA CNC lathe model LB2000 EXII M with OSP-P300LA
  • Big bore spindle Main spindle dia 80, 5000min-1, 22/15kW (15min/cont.)
  • Robot loader interface type E *In case Sub-spindle spec. Type ANYBUS-X
  • Pre-arr. for Mayfran chip conveyor (side chip disposal type) No.2 (E2)
  • And more...

Lagermaschine

Jetzt anfragen
Zurück nach oben