OKUMA EUROPE

English

Okuma Europe GmbH

MB-V series

MB-66VA/B

Find your distributor

Request a quote

Machining Centre

The basis for all Okuma vertical machining centers, the ACE CENTER MB-V series sets the bar for efficiency, utility, and high speed. Among the fastest in the industry. An impressive thermal stability and zero table overhang allow for tight tolerances and extreme accuracy. The ergonomic front-access design of the Okuma MB-V series requires minimal floor space while yielding maximum results. In addition, the MB-V series is environmentally friendly, requiring no hydraulic fluid. Construction optimisation based on FEM analysis and a rapid spindle traverse with Hi-G acceleration combine to create a solid, nimble machine that delivers on its promise of speed and accuracy, time and time again.

Specifications

[ ] = Optional

Table size [mm]

1,530 x 660

Axis travel [mm]

X: 1,500 / Y: 660 / Z: 660

Spindle speed [min-1]

8,000, 6,000 [15,000, 20,000, 25,000, 35,000]

No. of tools

20 [32], [48], [98]

Motor [kW]

11/7.5 [22/18.5, 30/22]

Features

APC, Connectable with Standroid

Videos / Downloads

MB-V series

Catalogue download

MB-66VA/B

Related products:

Table size [mm]
Axis travel [mm]
Spindle speed [min-1]
No. of tools
Motor [kW]
Features
Rapid traverse [m/min]
Floor space [mm]

[ ] = Optional

MB-66VA/B

MB-66VA/B

Table size [mm]:1,530 x 660
Axis travel [mm]:X: 1,500 / Y: 660 / Z: 660
Spindle speed [min-1]:8,000, 6,000 [15,000, 20,000, 25,000, 35,000]
No. of tools:20 [32], [48], [98]
Motor [kW]:11/7.5 [22/18.5, 30/22]
Features:APC, Connectable with Standroid
Rapid traverse [m/min]: -
Floor space [mm]: -

MB-46VII

Table size [mm]:760 x 460
Axis travel [mm]:X: 560 / Y: 460 / Z: 460
Spindle speed [min-1]:8,000, 6,000 [15,000, 20,000, 25,000, 35,000]
No. of tools:20 [32], [48], [98]
Motor [kW]:11/7.5 [22/18.5, 30/22, 15/11]
Features:APC, Connectable with Standroid
Rapid traverse [m/min]: -
Floor space [mm]: -

MB-56VII

MB-56VII

Table size [mm]:1,300 x 560
Axis travel [mm]:X: 1,050 / Y: 560 / Z: 460
Spindle speed [min-1]:8,000, 6,000 [15,000, 20,000, 25,000, 35,000]
No. of tools:20 [32], [48], [98]
Motor [kW]:11/7.5 [22/18.5, 15/11]
Features:APC, Connectable with Standroid
Rapid traverse [m/min]: -
Floor space [mm]: -

MB-80V

MB-80V

Table size [mm]:1,600 x 800, [2,000 x 800]
Axis travel [mm]:X: 1,600 / Y: 1,050 / Z: 600, [X: 2000 / Y: 1050 / Z: 600]
Spindle speed [min-1]:12,000, [15,000], [20,000]
No. of tools:32, [48], [64], [98], [132], [166], [234], [268]
Motor [kW]:26/18,5, [30/22], 33/26
Features: -
Rapid traverse [m/min]:X: 42 / Y: 42 / Z: 32
Floor space [mm]:4,500 x 2,970

Back to top