Search
MB-V series
MB-80V
Machining Centre
The basis for all Okuma vertical machining centers, the ACE CENTER MB-V series sets the bar for efficiency, utility, and high speed. Among the fastest in the industry. An impressive thermal stability and zero table overhang allow for tight tolerances and extreme accuracy. The ergonomic front-access design of the Okuma MB-V series requires minimal floor space while yielding maximum results. In addition, the MB-V series is environmentally friendly, requiring no hydraulic fluid. Construction optimisation based on FEM analysis and a rapid spindle traverse with Hi-G acceleration combine to create a solid, nimble machine that delivers on its promise of speed and accuracy, time and time again.
Specifications
[ ] = Optional
Table size [mm]
1,600 x 800, [2,000 x 800]
Axis travel [mm]
X: 1,600 / Y: 1,050 / Z: 600, [X: 2000 / Y: 1050 / Z: 600]
Spindle speed [min-1]
No. of tools
Motor [kW]
Rapid traverse [m/min]
X: 42 / Y: 42 / Z: 32
Floor space [mm]
4,500 x 2,970
Videos / Downloads
MB-80V
Related products:
- Table size [mm]:1,600 x 800, [2,000 x 800]
- Axis travel [mm]:X: 1,600 / Y: 1,050 / Z: 600, [X: 2000 / Y: 1050 / Z: 600]
- Spindle speed [min-1]:12,000, [15,000], [20,000]
- No. of tools:32, [48], [64], [98], [132], [166], [234], [268]
- Motor [kW]:26/18,5, [30/22], 33/26
- Features: -
- Rapid traverse [m/min]:X: 42 / Y: 42 / Z: 32
- Floor space [mm]:4,500 x 2,970
- Table size [mm]:760 x 460
- Axis travel [mm]:X: 560 / Y: 460 / Z: 460
- Spindle speed [min-1]:8,000, 6,000 [15,000, 20,000, 25,000, 35,000]
- No. of tools:20 [32], [48], [98]
- Motor [kW]:11/7.5 [22/18.5, 30/22, 15/11]
- Features:APC, Connectable with Standroid
- Rapid traverse [m/min]: -
- Floor space [mm]: -
- Table size [mm]:1,300 x 560
- Axis travel [mm]:X: 1,050 / Y: 560 / Z: 460
- Spindle speed [min-1]:8,000, 6,000 [15,000, 20,000, 25,000, 35,000]
- No. of tools:20 [32], [48], [98]
- Motor [kW]:11/7.5 [22/18.5, 15/11]
- Features:APC, Connectable with Standroid
- Rapid traverse [m/min]: -
- Floor space [mm]: -
- Table size [mm]:1,530 x 660
- Axis travel [mm]:X: 1,500 / Y: 660 / Z: 660
- Spindle speed [min-1]:8,000, 6,000 [15,000, 20,000, 25,000, 35,000]
- No. of tools:20 [32], [48], [98]
- Motor [kW]:11/7.5 [22/18.5, 30/22]
- Features:APC, Connectable with Standroid
- Rapid traverse [m/min]: -
- Floor space [mm]: -