MA-600HII
Categorie: | |
Project: | 180437 |
Production Year: | 2018 |
Description
- OKUMA Horizontal Machining Center MA-600H II with OSP-P300MA CNC Controller
- High speed spindle, 12,000 min-1 BT50 Big Plus 37/26kw(10 min./cont.)
- 60-tool ATC for BT50 or BT50 Big Plus
- B-axis NC rotary table
- Shower coolant
- Pre-arr. Mayfran chip conveyor Type M-A (Rear disposal) with chip pan
- Tool breakage detection including auto tool length offset
- Pre-arrangement for auto zero offset function (OMP60) including software
- And more...
MU-4000V-L
Categorie: | |
Project: | 160693 |
Production Year: | 2016 |
Description
- OKUMA 5-axis Vertical Machining Center MU-4000V-L with OSP-P300SA-H
- Ball screw nut cooling X/Y/Z axis
- 166-tool Matrix ATC for HSK-A63 spindle i/o 32-tool ATC
- Pre-arr. for 2APC
- Shower coolant supply
- Tool breakage detection incl. auto tool length offset Renishaw sensor
- Pre-arrangement for Auto zero function (software is included)
- Simultaneous 5-axis KIT
- Collision avoidance system for basic 5 axis
- DUTY
- Smart I/F
- Modification from APC Table to standard Table
- DNC-C Ethernet P300MA
- Gear Machining package
- And more...
MU-4000V-L
Categorie: | |
Project: | 161043 |
Production Year: | 2017 |
Description
- OKUMA 5-axis Vertical Machining Center MU-4000V-L with OSP-P300SA-H
- Ball screw nut cooling X/Y/Z axis
- 166-tool Matrix ATC for BT40 (or Big Plus) or HSK-A63 spindle i/o 32-tool ATC
- Pre-arr. for 2APC including totally enclosing guard with shutter and 1 pc. of pallets Dia. 400mm M12 Tap
- Shower coolant supply
- Tool breakage detection incl. auto tool length offset Renishaw sensor
- Pre-arrangement for Auto zero function (software is included)
- Simultaneous 5-axis KIT
- DUTY
- Gear Machining package
- Smart I/F
- And more...
MB-56VB
Categorie: | |
Project: | 160406 |
Production Year: | 2016 |
Description
- OKUMA Vertical Machining Center MB-56VB with OSP-P300M
- 6,000min-1.11/7.5kW
- High speed spindle, 50 - 12,000 min-1 BT50 with BIG PLUS specification
- 48-tool ATC for BT40 (or Big Plus)
- Shower coolant supply from left side
- Tool breakage detection including auto tool length offset
- Pre-arrangement for auto zero offset function (software is included)
- High column specification (+200mm)
- Mounting touch sensor base for high cross +200mm
- Smart I/F
- And more...
SOLDLU-S1600 2SC
Categorie: | |
Project: | 160143 |
Production Year: | 2016 |
Description
- OKUMA CNC Lathe Model LU-S1600 L 2SC 480 with OSP-P300L
- Main spindle speed 6,000 min-1 (Dia. 140) 11/7.5kW (20min./cont.)
- Hydraulic quill type NC Self-traveling tailstock
- Tailstock sleeve advance speed switchable
- BCD 480mm spec.
- Chip conveyor(Hinge), Rear chip disposal H-type for 550 model and Machine linked chip conveyor specification
- Upper/lower turret coolant discharge control
- Coolant level detection
- Pre-arrangement for high pressure coolant unit 7MPa with pumping pomp,without coolant pressure high/low switchable
- OGL5-OII Loader (on-machine type) with legs for self-standing,
- Tailstock quill speed 2-steps switch
- Machining Navi L-g
- DUTY
- Smart I/F
- And more...
MU-6300V
Categorie: | |
Project: | 190162 |
Production Year: | 2019 |
Description
- OKUMA 5-axis Vertical Machining Center MU-6300V with OSP-P300M-H
- High speed spindle, 50 - 15,000 min-1 HSK-A63, VAC22/18.5kW
- 200-tool Matrix ATC for HSK-A63 spindle i/o 32-tool ATC
- Workpiece washing gun without coolant pump (Coolant gun)
- Pre-arrangement Spindle through coolant, high pressure 7.0MPA
- Shower coolant supply without coolant pump
- Lift up type chip conveyor Floor type height:1000mm (hinged conveyor)
- Pre-arr. for Hydraulic fixture
- Tool breakage detection incl. auto tool length offset Renishaw sensor
- 5-Axis Auto Tuning System, Standard Kit
- 1000 sets of common variables
- Programmable message function
- Mop-tool (adaptive control and overload detection)
- DNC-C Ethernet
- Collision avoidance system for basic 4/5 axis
- Robot Loader I/F Type-E Anybus-X AB7686 Device Net-Ether CAT
- API library 2 function
- And More...
MU-S600V
Categorie: | |
Project: | 161192 |
Production Year: | 2017 |
Description
- OKUMA 5-axis Vertical Machining Center MU-S600V with OSP-P300MA-H
- Machine connection spec (left side (Master) incl. 2 pcs of leveling
- Absoscale X/Y/Z axis
- Shower coolant
- Drum filter Lift up type chip conveyor Consep 2000
- Pre-arr. for Hydraulic fixture
- Tool breakage detection incl. auto tool length offset
- Ball screw nut cooling X/Y/Z axis
- 5-axis Auto tuning system, Standard Kit
- One-touch IGF Advance -D kit
- DNC-C Ethernet
- External program selection C
- External M-Code command
- Robot Loader I/F Type-E up to terminal
- Collision avoidance system for basic 4/5 axis
- OSP-API
- D D encoder for B&C axis
- Pre-arrangement for mist collector
- Robot I/F Through Any Bus
- And more...
MU-S600V
Categorie: | |
Project: | 161193 |
Production Year: | 2017 |
Description
- OKUMA 5-axis Vertical Machining Center MU-S600V with OSP-P300MA-H
- Absoscale X/Y/Z axis
- Shower coolant
- Drum filter Lift up type chip conveyor Consep 2000
- Pre-arr. for Hydraulic fixture
- Tool breakage detection incl. auto tool length offset
- Ball screw nut cooling X/Y/Z axis
- 5-axis Auto tuning system, Standard Kit
- One-touch IGF Advance -D kit
- DNC-C Ethernet
- External program selection C
- External M-Code command
- Robot Loader I/F Type-E up to terminal
- Collision avoidance system for basic 4/5 axis
- Machining Navi M-g II
- And more...
MULTUS B250II C 750
Categorie: | |
Project: | 161199 |
Production Year: | 2017 |
Description
- OKUMA Intelligent Multitasking Model MULTUS B250II C750 with OSP-P300SA CNC Controller
- 40-tool ATC
- Hollow chuck B-208 A6 and draw tube
- Drum filter chip conveyor (x 750) L, side disposal (hinge + scraper) line filter
- Pre-arr. for mist collector
- Power Monitor Wattmeter
- One-touch IGF Advance M-E kit
- Pitch error compensation C-axis
- Machining Navi T-g, for L spindle only
- Machining Navi M-i
- Smart I/F
- Measuring Sensor M&H RWP20.50-G-PP (2.4GHz)
- Pre-arr for In process gauging
- And more...
SOLDMU-400VII
Categorie: | |
Project: | 200250 |
Production Year: | 2018 |
Description
- OKUMA 5-axis Vertical Machining Center MU-400VII with OSP-P300MA-H
- High speed spindle, 50 - 15,000 min-1 BT40, VAC22/18.5kW (10 min./cont.)
- 200-tool Matrix ATC for BT40 (or Big Plus) spindle i/o 20-tool ATC
- Balluff Tool ID
- Software and electrical hardware only for spindle through, high pressure
7.0 MPA, with 7 steps switchable, without pumps - Pre-arrangement for Spindle through coolant, high pressure 7.0MPA
- Shower coolant supply without coolant pump
- Tool breakage detection including auto tool length offset (touch sensor)
- Auto zero offset function incl. work gauging, Renishaw touch probe OMP60
- Pre-arr. for hydraulic fixture
- Interactive gauging function
- Robot Loader I/F
- DNC-C Ethernet
- External Alarm Signals A, B, C
- And more...
MB-56VA
Categorie: | |
Project: | 171084 |
Production Year: | 2018 |
Description
- OKUMA Vertical Machining Center MB-56VA with OSP-P300MA
- High speed spindle, 50 - 15,000 min-1 BT40, VAC22/18.5kW (10 min./cont.)
- 32-tool ATC for BT40 (or Big Plus) spindle i/o standard 20-tool ATC
- Shower coolant supply from left side
- Lift up type chip conveyor, floor type hight:750mm (hinged conveyor)
- Pre-arr. for TSUDAKOMA RWA-250R.D (with manual tailstock TL-160M) CE
- Tool breakage detection including auto tool length offset (touch sensor)
- Auto zero offset function including work gauging, Renishaw touch probe
- One-touch IGF Advance -E kit instead of standard 3D-E kit
- Collision avoidance system for MU, Double column
- One-Touch Spreadsheet (excel machining)
- And more...
SOLDMU-4000V-L
Categorie: | |
Project: | 160618 |
Production Year: | 2016 |
Description
- OKUMA 5-axis Vertical Machining Center MU-4000V-L with OSP-P300SA-H
- Ball screw nut cooling X/Y/Z axis
- 166-tool Matrix ATC for HSK-A63 spindle i/o 32-tool ATC
- Pre-arr. for 2APC
- Shower coolant supply
- Tool breakage detection incl. auto tool length offset Renishaw sensor
- Pre-arrangement for Auto zero function (software is included)
- Simultaneous 5-axis KIT
- Gear Machining function only Software
- Smart I/F
- And more...
LB2000 EX II M C 300
Categorie: | |
Project: | 180593 |
Production Year: | 2018 |
Description
- OKUMA CNC lathe model LB2000 EXII M with OSP-P300LA
- Big bore spindle Main spindle dia 80, 5000min-1, 22/15kW
- Hollow cylinder SR1670 only (No draw tube) i/o Std, for Main Big Bore
- Pre-arr. for Mayfran chip conveyor No.1 (E1)
- Swing bucket type parts catcher for standard machine
- Universal Bar feeder interface only
- Tool life management
- And more...
LB4000 EX II C 1500
Categorie: | |
Project: | 160433 |
Production Year: | 2016 |
Description
- OKUMA CNC lathe model LB4000 EXII L C1500 with OSP-P300L
- Big bore spindle dia.110, 3000min-1, 37/30kW (30min/cont.)
- 15" hollow chuck Kitagawa B-215A101 and F2596H i/o standard chuck package
- Soft chuck jaw blank type B for B2-15-A chuck
- Hard chuck jaw std. type for B215 chuck
- Chip conveyor with CE mark, side chip disposal H type for T/C1500 model
- And more...
SOLDMB-5000HII
Categorie: | |
Project: | 180916 |
Production Year: | 2019 |
Description
- OKUMA Horizontal Machining Center MB-5000H with OSP-P300MA
- Spindle 15,000min-1 BT40 Big Plus
- B-axis NC rotary table instead of standard 1 degree indexer
- Pre-arr. for Mayfran chip conveyor Type M-A (Rear disposal)
- Tool breakage detection incl. Auto tool length offset
- Pre-arr. for auto zero offset function (OMP60) incl. Software
- And more...
SOLDGENOS L300E-MY-e
Categorie: | |
Project: | 180502 |
Production Year: | 2018 |
Description
- OKUMA CNC lathe model GENOS L300E-MY-e with OSP-P300LA-e
- Main spindle motor 15/11kw / RPM 3.000 std.
- NC-V12 turret / VDI turret for MY type
- Chip conveyor, side disposal, H-type
- Hard jaws, 3 pcs /set
- Soft jaws, 3 pcs /set type A
- N210 hollow chuck and hollow cylinder
- High pressure coolant pump 0,8kw
- OSP-P300L-R Animation Kit (TD-Kit)
- Touch setter, Manual
- USB port / 2 station
- Multi-Transformer 400V European Standard
- Position control of tailstock quill
- Standard toolings for VDI turret
- Simple tailstock tow-along
- Simple tailstock software
- And more...
SOLDLU3000 EX MY 2SC 950
Categorie: | |
Project: | 170888 |
Production Year: | 2018 |
Description
- OKUMA CNC Lathe Model LU3000 EX MY 2SC950 with OSP-P300LA CNC Controller
- Programmable tailstock, auto tow-along type base, dead center tailstock MT No.5
- Built-in center type tailstock, MT No.4
- Pre-arr. for Mayfran chip conveyor No.1 (E1)
- Pre-arr. for hydraulic steady rest (SLU-X2Z) on lower turret
- Absoscale for Xa-axis only
- Turcite with 0.1 micron control for Xa-axis only
- And more...
SOLDMULTUS B300II W
Categorie: | |
Project: | 180564 |
Production Year: | 2018 |
Description
- OKUMA Intelligent Multitasking Model MULTUS B300II W with OSP-P300SA CNC
- Big bore spindle, A2-8/3,800min-1/22/15kW
- Milling spindle (H1) 10000 min-1, PREX Motor 16/11 kw (i/o STD)
- 60-tools ATC (i/o Std)
- Pre-arr. for chip conveyor Side disposal
- Coolant flush in slots beside H1 turret
- And more...
SOLDMA-600HII
Categorie: | |
Project: | 180688 |
Production Year: | 2018 |
Description
- OKUMA Horizontal Machining Center MA-600H II with OSP-P300MA
- High speed spindle, 12,000 min-1 BT50 Big Plus 37/26kw(10 min./cont.)
- 60-tool ATC for BT50 or BT50 Big Plus instead of standard 40-tool ATC
- Shower coolant
- Pre-arr. Mayfran chip conveyor Type M-A (Rear disposal) with chip pan
- Tool breakage detection including auto tool length offset
- Pre-arrangement for auto zero offset function (OMP60) including software
- DUTY
- And more...
MU-6300V
Categorie: | |
Project: | 151155 |
Production Year: | 2016 |
Description
- OKUMA 5-axis Vertical Machining Center MU-6300V with OSP-P300M-H
- High speed spindle 50 - 12,000min-1 BT50, VAC26/18.5kW (10min/cont) with BIG PLUS specification
- Absoscale X/Y/Z axis, in case with APC spec.
- 98-tool Matrix ATC for BT50 (or Big Plus) spindle
- Pre-arr. for 2 APC
- Shower coolant supply
- Tool breakage detection
- Pre-arrangement for Auto zero offset function (Software is included)
- 5-axis Tuning System Standard Kit
- DUTY
- And more...
SOLDLB3000 EX II C M 500
Categorie: | |
Project: | 180420 |
Production Year: | 2018 |
Description
- OKUMA CNC lathe model LB3000 EXII M C 500 with OSP-P300LA
- Big bore spindle, dia 91, 4200min-1, 30/22kW (30min/cont.)
- Built-in type tailstock MT No.4, with Tailstock center MT No.4
- Pre-arr. for Mayfran chip conveyor No.1 (E1) (Side disposal)
- High pressure coolant pump 0.8kW (for 500/1000)
- Coolant flusher for saddle cover B (left side only)
- And more...
SOLDLB3000 EX II M C 1000
Categorie: | |
Project: | 171133 |
Production Year: | 2018 |
Description
- OKUMA CNC lathe model LB3000 EXII M C 1000 with OSP-P300LA
- Big bore spindle, dia 91, 4200min-1, 30/22kW (30min/cont.)
- Built-in type tailstock MT No.4, with Tailstock center MT No.4
- Pre-arr. for Mayfran chip conveyor No.1 (E1) (Side disposal)
- High pressure coolant pump 0.8kW (for 500/1000)
- Coolant flusher for saddle cover B (left side only)
- DUTY
- Hollow Chuck B210 A8 with drawtube and jaws for LB3000 Big Bore
- Smart I/F
- And more...
SOLDLB3000 EX II M C 500
Categorie: | |
Project: | 181113 |
Production Year: | 2019 |
Description
- OKUMA CNC lathe model LB3000 EXII M C 500 with OSP-P300LA
- Big bore spindle, dia 91, 4200min-1, 30/22kW (30min/cont.)
- Built-in type tailstock MT No.4, with Tailstock center MT No.4
- Pre-arr. for Mayfran chip conveyor No.1 (E1) (Side disposal)
- High pressure coolant pump 0.8kW (for 500/1000)
- Coolant flusher for saddle cover B (left side only)
- And more...
SOLDLU4000 EX MY 2SC 950
Categorie: | |
Project: | 170869 |
Production Year: | 2018 |
Description
- OKUMA CNC Lathe Model LU4000EX MY 2SC 1250 with OSP-P300LA
- Big Bore Spindle (A2-11)30-3000min-1more horse-power PREX32/22kW(20min/cont.)
- Programmable tailstock, auto tow-along type base, dead center tailstock
- Pre-arr. for Mayfran chip conveyor No.1(E1) (side chip disposal type)
- And more...
SOLDLB2000 EX II M C 500
Categorie: | |
Project: | 180714 |
Production Year: | 2018 |
Description
- OKUMA CNC lathe model LB2000 EXII M with OSP-P300LA
- Big bore spindle Main spindle dia 80, 5000min-1, 22/15kW
- Hollow cylinder SS1770 only (No draw tube) i/o Std, for Main Big Bore
- Pre-arr. for Mayfran chip conveyor No.1 (E1)
- And more...
LB3000 EX II MY C 450
Categorie: | |
Project: | 180422 |
Production Year: | 2019 |
Description
- OKUMA CNC lathe model LB3000 EXII MY C 450 with OSP-P300LA
- Big bore spindle, dia 91, 4200min-1, 30/22kW (30min/cont.)
- Built-in type tailstock MT No.4, with Tailstock center MT No.4
- Pre-arr. for Mayfran chip conveyor No.1 (E1) (Side disposal)
- High pressure coolant pump 0.8kW (for 500/1000)
- Coolant flusher for saddle cover B (left side only)
- And more...
SOLDLB3000 EX II L C 1000
Categorie: | |
Project: | 180594 |
Production Year: | 2018 |
Description
- OKUMA CNC lathe model LB3000 EXII L C 1000 with OSP-P300LA
- Hollow cylinder SR1670 only (No draw tube) for Main i/o Std.
- Pre-arr. for Mayfran chip conveyor No.1 (E1) (Side disposal)
- And more...
LB3000 EX II M C 1000
Categorie: | |
Project: | 181000 |
Production Year: | 2019 |
Description
- OKUMA CNC lathe model LB3000 EXII M C 1000 with OSP-P300LA
- Big bore spindle, dia 91, 4200min-1, 30/22kW (30min/cont.)
- Built-in type tailstock MT No.4, with Tailstock center MT No.4
- Pre-arr. for Mayfran chip conveyor No.1 (E1) (Side disposal)
- High pressure coolant pump 0.8kW (for 500/1000)
- Coolant flusher for saddle cover B (left side only)
- And more...
LB3000 EX II M C 1000
Categorie: | |
Project: | 200248 |
Production Year: | 2018 |
Description
- OKUMA CNC lathe model LB3000 EXII M C 1000 with OSP-P300LA
- Big bore spindle, dia 91, 4200min-1, 30/22kW (30min/cont.)
- Hollow cylinder Kitagawa SR1781 only for Big Bore, i/o Std.
- Built-in type tailstock MT No.4, with Tailstock center MT No.4
- Pre-arr. for Mayfran chip conveyor No.1 (E1) (Side disposal)
- High pressure coolant pump 0.8kW (for 500/1000)
- Coolant flusher for saddle cover B (left side only)
- In Process Auto Work Gauging System-D,inc 1pc.Each of feeler A and B
- Software for auto door o/c both sides
- Machining Navi L-G
- Software for coolant low level detection
- SERVO SENSOR UNIT
- Tool comp. function 96 sets
- DUTY
- SADDLE
- GIB
- WIPER SET
- And more...
LB3000 EX II M C 500
Categorie: | |
Project: | 181114 |
Production Year: | 2019 |
Description
- OKUMA CNC lathe model LB3000 EXII M C 500 with OSP-P300LA
- Big bore spindle, dia 91, 4200min-1, 30/22kW (30min/cont.)
- Built-in type tailstock MT No.4, with Tailstock center MT No.4
- Pre-arr. for Mayfran chip conveyor No.1 (E1) (Side disposal) NEW pin
- High pressure coolant pump 0.8kW (for 500/1000)
- Coolant flusher for saddle cover B (left side only)
- And more...
LB3000 EX II M C 500
Categorie: | |
Project: | 181260 |
Production Year: | 2019 |
Description
- OKUMA CNC lathe model LB3000 EXII M C 500 with OSP-P300LA
- Big bore spindle, dia 91, 4200min-1, 30/22kW (30min/cont.)
- Built-in type tailstock MT No.4, with Tailstock center MT No.4
- Pre-arr. for Mayfran chip conveyor No.1 (E1) (Side disposal) NEW pin
- High pressure coolant pump 0.8kW (for 500/1000)
- Coolant flusher for saddle cover B (left side only)
- And more...
LB3000 EX II M C 500
Categorie: | |
Project: | 181261 |
Production Year: | 2019 |
Description
- OKUMA CNC lathe model LB3000 EXII M C 500 with OSP-P300LA
- Big bore spindle, dia 91, 4200min-1, 30/22kW (30min/cont.)
- Built-in type tailstock MT No.4, with Tailstock center MT No.4
- Pre-arr. for Mayfran chip conveyor No.1 (E1) (Side disposal) NEW pin
- High pressure coolant pump 0.8kW (for 500/1000)
- Coolant flusher for saddle cover B (left side only)
- And more...
LB3000 EX II M C 500
Categorie: | |
Project: | 181262 |
Production Year: | 2019 |
Description
- OKUMA CNC lathe model LB3000 EXII M C 500 with OSP-P300LA
- Big bore spindle, dia 91, 4200min-1, 30/22kW (30min/cont.)
- Built-in type tailstock MT No.4, with Tailstock center MT No.4
- Pre-arr. for Mayfran chip conveyor No.1 (E1) (Side disposal) NEW pin
- High pressure coolant pump 0.8kW (for 500/1000)
- Coolant flusher for saddle cover B (left side only)
- And more...
LB3000 EX II M C 1000
Categorie: | |
Project: | 181263 |
Production Year: | 2019 |
Description
- OKUMA CNC lathe model LB3000 EXII M C 1000 with OSP-P300LA
- Big bore spindle, dia 91, 4200min-1, 30/22kW (30min/cont.)
- Built-in type tailstock MT No.4, with Tailstock center MT No.4
- Pre-arr. for Mayfran chip conveyor No.1 (E1) (Side disposal)
- High pressure coolant pump 0.8kW (for 500/1000)
- Coolant flusher for saddle cover B (left side only)
- And more...
LB3000 EX II M C 1000
Categorie: | |
Project: | 181264 |
Production Year: | 2019 |
Description
- OKUMA CNC lathe model LB3000 EXII M C 1000 with OSP-P300LA
- Big bore spindle, dia 91, 4200min-1, 30/22kW (30min/cont.)
- Built-in type tailstock MT No.4, with Tailstock center MT No.4
- Pre-arr. for Mayfran chip conveyor No.1 (E1) (Side disposal)
- High pressure coolant pump 0.8kW (for 500/1000)
- Coolant flusher for saddle cover B (left side only)
- And more...
Back to top